To Move Marker Information Off The Grids - Agilent Technologies 8753ET User Manual

Making Measurements
Using Markers
Figure 1-13 Active and Inactive Markers Example
• To switch off all of the markers, press

To Move Marker Information Off the Grids

If marker information obscures the display traces, you can turn off the softkey menu and move the marker
information off the display traces and into the softkey menu area. Pressing the backspace key
performs this function. This is a toggle function. Pressing
softkey menu. The softkey menu is also restored when you press any softkey or a hardkey which leads to a
menu.
1. Set up a four-graticule display as described in
2. Activate four markers by pressing
NOTE
Observe that the markers appear on all of the grids. To activate markers on individual grids,
press
Marker Fctn
UNCOUPLED. Then, activate the channel in which you wish to have markers, press
Marker
3. Turn off the softkey menu and move the marker information off the grids by pressing
The display will be similar to
1-26
ALL OFF
"Viewing Four Measurement Channels" on page
Marker 1
MARKER MODE MENU
, then select the markers for that channel.
Figure 1-14.
.
alternately hides and restores the current
.
2 3 4
, and set
1-14.
to
MARKERS:
.