Agilent Technologies 8753ET User Manual page 136

Making Measurements
Single Connection Multiple Measurement Configuration (Option 014 Only)
of how to setup the analyzer.
Press the following key sequence:
Seq NEW SEQ/MODIFY SEQ
TTL I/O TTL OUT
6 x1 TESTSET I/O REV
6 x1 RETURN
DONE SEQ MODIFY
TITLE SEQUENCE
Rotate the knob on the front panel and select the following:
E SELECT LETTER
X SELECT LETTER
T SELECT LETTER
DONE RETURN
NEW SEQ/MODIFY SEQ
TESTSET I/O FWD
TESTSET I/O REV
RETURN RETURN
MORE TITLE SEQUENCE
Rotate the knob on the front panel and select the following:
S SELECT LETTER
T SELECT LETTER
D SELECT LETTER
DONE RETURN
Preset the instrument. Display softkeys should show
Sequence program example for EXT: (as displayed on the analyzer)
Start of Sequence 
TESTSET I/O FWD 
6 
x1 
TESTSET I/O REV 
6 
x1 
1972 empty bytes available.
GPIB Commands
TSTIOFWD7; TSTIOFWD6; TSTIOREV7; TSTIOREV6;
1-122
SEQUENCE 1 SEQ1
TESTSET I/O FWD
RETURN
MORE
SEQUENCE 1 SEQ1
SEQUENCE 2 SEQ2
7 x1
7 x1
DONE SEQ MODIFY
SEQUENCE 1 SEQ1



ERASE TITLE
TTL I/O TTL OUT
ERASE TITLE
SEQUENCE 1 EXT
.
SEQUENCE 2 STD