Table of Contents
Advertisement
Best Path:
Imported from.............................. 2:200:100.10.1.1
Local Preference........................... 100
AS Path.................................... 20 10
Origin..................................... IGP
Metric..................................... 10
Type....................................... External
IGP Cost................................... 30
Peer (Peer ID)............................. 100.10.1.1 (32.4.1.1)
BGP Next Hop............................... 100.10.1.1
Atomic Aggregate........................... Included
Aggregator (AS, Router ID)................. 300, 14.1.1.1
Communities................................ no-export
Extended Community......................... RT:1:100
Originator................................
Non-best Paths:
Local Preference........................... 200
AS Path.................................... 18 50 27
Origin..................................... Incomplete
Type....................................... External
IGP Cost................................... 10
Peer (Peer ID)............................. 200.1.1.1 (18.24.1.3)
BGP Next Hop............................... 200.1.1.1
Extended Community......................... RT:3:300
show router-capability
Use this command to display the router capabilities of the loaded firmware
image.
Syntax
show router-capability
Default Configuration
For the N3000_N2000v6.3.x.x builds, ACCESS ROUTER capabilities are
supplied. MP-BGP capability is not available with this firmware.
For the N3000BGPv6.3.x.x builds, AGGREGATION ROUTER capabilities
are supplied. iSCSI, MLAG, DVLAN, MVR, GARP, Auto-VoIP, and Web
capabilities are unavailable.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
RT:2:200
10.1.1.1
Layer 3 Routing Commands
1379
Advertisement
Table of Contents
