Sip System Information Setup - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking.
Input Data
SV8100 Programming Manual

10-28 : SIP System Information Setup

Item
Item
No.
01 Domain Name
Set the domain name of
the SIP-URL.
02 Host Name
Set the host name of
the SIP-URL.
03 Transport Protocol
Set the protocol for the
connection.
04 UserID
User ID in the SIP Invite
Setup message. Use it
for outbound caller ID
information if no
information is assigned
in commands 21-17,
21-19, 15-16, 14-12,
and 10-36. A call
cannot be completed
across the span if there
is no outbound CID
info. The reason for
this is: the from and
display portions of the
invite message would
be blank, and it would
not know where the call
originated from.
Input Data
Up to 64 Characters
(ex.:UserID@HostName.DomainName)
Up to 48 Characters
(ex.:UserID@HostName.DomainName)
0 = UDP
1 = TCP
Up to 32 Characters
When assigning the User ID, the ID may
contain only alpha characters. (A space
and/or special characters are not allowed in
the User ID field).
(ex.:UserID@HostName.DomainName)
Issue 11.0
Default
None
None
0
None
2 - 45