Sip Server Information Setup - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup
for outbound/inbound. The 10-29 commands are not used in non-registration mode.

SV8100 Programming Manual

10-29 : SIP Server Information Setup

If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then removed or
not used, the entries in Program 10-29-xx must be set back to their default settings. Even if
10-29-01 is set to 0 (off), the SV8100 still checks the settings in the remaining 10-29 programs.
Input Data
Item
Item
No.
01
Default Proxy
(Outbound)
Set whether or not the
SIP message is
always sent through
the Default Proxy.
02
Default Proxy
(Inbound)
Need to be registered
in registration mode.
Set whether or not the
SIP message is
always received
through the Default
Proxy.
03 Default Proxy IP
Address
This is optional and
used if the provider
gives you a proxy
address that is
different than the
registration address.
If the provider is using
domain names
instead of IP
addresses, leave this
at default.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Issue 11.0
Default
0
0
0.0.0.0
2 - 47