NEC UNIVERGE SV8100 Programming Manual page 960

Issue 11.0
3 - 918
Item
Item
No.
06
Call Forwarding Follow-
Me Destination.
Read only.
Indicates Call forwarding
follow-me extension
number set per extension.
07 Do Not Disturb
Read only.
Indicates DND setting
status per extension.
08 Message Waiting (Set)
Read only.
Indicates extension
number which you set
Message Waiting.
09 Message Waiting (Rcv)
Read only.
Indicates extension
number when left Message
Waiting
10 Alarm Clock 1
Read only.
Indicates Alarm Clock 1
setting status.
11 Preset time at Alarm 1
Read only.
Indicates the time set in
Alarm Clock 1.
12
Alarm Clock 2
Read only.
Indicates Alarm Clock 2
setting status.
13 Preset Time at Alarm 2
Read only.
Indicates the time set in
Alarm Clock 2.
14 Forced Intercom Ring
(ICM Call Type)
Read only.
Indicates ICM Call Type
per extension.
Input Data
Extension Number
(Up to 8 digits)
0 = No setting
1 = DND External
2 = DND Intercom
3 = DND Transfer
4 = DND All
Extension Number (Up to
8 digits)
Extension Number (Up to
8 digits)
0 = Disable
1 = Enable
Time set in Alarm Clock 1.
When PRG93-03-10 is "0",
[00:00] is indicated.
0 = Disable
1 = Enable
Time set in Alarm Clock 2.
When PRG93-03-12 is "0",
[00:00] is indicated.
0 = Disable(Voice)
1 = Enable(Signal)
Program 93: System Information
UNIVERGE SV8100
Related
Default
Program
None 11-11-07
None 11-11-08
None 11-11-09
11-11-10
11-11-11
None 11-11-09
11-11-10
11-11-11
None 11-11-12
None 11-11-12
None 11-11-12
None 11-11-12
None 11-11-15
11-11-16