Repeat Dial Setup - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 21-08 : Repeat Dial Setup to define the automatic Repeat Dial data.
Feature Cross Reference
None
SV8100 Programming Manual
Program 21 : Outgoing Call Setup
Input Data
Item
No.
01 Repeat Redial Count
Set how many times a Repeat Redial
automatically repeats if the call does not go
through.
02 Repeat Redial Interval Time
Set the time between Repeat Redial attempts.
03
Repeat Dial Calling Timer
After dialing the trunk call, Repeat Redial
maintains the call after this time. After this time,
the system terminates the call, waits the Repeat
Redial Time (Timer 02) and tries again.
04 Time for Send Busy Tone for ISDN Trunk
Set the time to send out Busy Tone with an
ISDN line, when called party is busy.
Conditions
None

21-08 : Repeat Dial Setup

Item
Issue 11.0
Input Data Default
0~255 3
0~64800 (sec)
60
0~64800 (sec) 30
0~64800 (sec) 0
2 - 321