Ipl Basic Setup - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 84-27 : IPL Basic Setup to set the DTMF Relay and the SRTP mode
of the IPL.
Index 1
Input Data
Item
No.
01
02
03
04
06
07
08
2 - 802
Program 84 : Hardware Setup for VoIP
Slot Number
Item
DTMF Relay Setup
Setup CODEC Mode
Default means the system uses another
CODEC except G.723.
Mode 1 means the system uses all
CODECs, and there is no limitation of
available channels by IPLB.
SRTP Mode Setup
IPLB doesn't have a limitation of the total
number of available channels, even if
you set to 1.
SRTP Mode Select
H.245 Port Number
Preparation Completion Response
Port Number
DTMF Duration (In Band)
Used only by IPLB. Effective when
84-27-01 = 1 (In Band).

84-27 : IPL Basic Setup

1
Input Data
0 = DTMF Relay disabled
1 = In-Band DTMF Relay - Do
not report to host processor.
2 = Out of Band Relay - Do not
pass tones as voice.
0 = Default
1 = Mode 1 (G.723/iLBC)
0 = Disable
1 = Enable
0 = Mode1
0~65535
0~65535
0: follow RFC2833
25~2000(ms)
Program 84 : Hardware Setup for VoIP
UNIVERGE SV8100
Default
2
0
0
0
10100
4000
0