Dil Assignment - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or
Department Calling Group for each DIL Incoming trunk. A DIL rings an extension
directly, without any other Access Map or Ring Group programming. If an extension
has a line key, the DIL rings the line key. If the extension does not have a line key, the
DIL rings CAP keys. Use Program 22-02 to designate a trunk as a DIL. You can
make eight DIL assignments, one for each Night Service mode.
Input Data
Feature Cross Reference

2 - 346
Program 22 : Incoming Call Setup
Trunk Port Number
Item Day/Night
No. Mode
01 1~8
Conditions
Program 22-02 must be set to four for the trunk.

Direct Inward Line (DIL)

22-07 : DIL Assignment

Number of Transferring
Destination
Extension Number (maximum
eight digits)
Pilot Number
Program 22 : Incoming Call Setup
UNIVERGE SV8100
001~200
Default
No Setting