Sv8100 Inmail Station Mailbox Options - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use
mailbox. Station mailboxes are automatically assigned as Subscriber Mailboxes.
Normally, SV8100 InMail Station Mailbox numbers 1~26 should correspond to
extensions 101~126.
Input Data
Input Data
Item
No.
01
02
03
SV8100 Programming Manual

47-02 : SV8100 InMail Station Mailbox Options

SV8100 InMail
47-02 :
Station Mailbox Number
Mailbox Type
Enable/Disable the mailbox. An extension mailbox is
not accessible when it is disabled (even though its
stored messages and configuration are retained in
memory.) If disabled, a user pressing Message
initiates a remote logon and is asked to enter their
mailbox number. A voice prompt then announces:
"That mailbox does not exist."
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
Mailbox Number
Select the extension number associated with the
mailbox you are programming. Normally, mailbox 1
should use Mailbox Number 101, mailbox 2 should
use Mailbox Number 102, etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
Number of Messages
Set the maximum number of messages that can be
left in the Subscriber Mailbox. If a caller tries to leave
a message after this limit is reached, they hear:
"That mailbox is full." SV8100 InMail then hangs up.
Program 47 : In-Mail
Station Mailbox Options
Item
to set up a station/extension
1~512
Input Data
0 = None 1
1 = Personal
2 = Group
Digits (8 maximum, Mailbox 1 = 101
using 0~9) Mailboxes 2~64 =
102~164
Mailboxes 65~512
= No entry
0~99 messages 99 for mailbox 1
To conserve storage 20 for all other
space, enter 0 for all mailboxes
unused mailboxes.
Issue 11.0
Default
2 - 553