Save Data - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
This program should be used after changing the programmed data.
Feature Cross Reference
None
2 - 832
Program 90 : Maintenance Program
Program 90-03 : Save Data
Input Data
Item
Item
No.
01

Save Data

Conditions
When reloading a customer database, the system must be reset (either using

Program 90-08 or power down/power up) before all uploaded programming takes
affect.
to save the programmed data on the USB Flash Drive.
Input Data
Dial 1 + press Transfer (Press Transfer to cancel.)
Program 90 : Maintenance Program
UNIVERGE SV8100
90-03 : Save Data