Account Code Setup - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use
extension Class of Service. Assign a Class of Service to extensions in Program
20-06.
Input Data
Item
No.
01
02
03
04
2 - 464
Program 35 : SMDR Account Code Setup
Program 35-05 : Account Code Setup
Class of Service Number
Item
Account Code Mode
Select the Account Code Mode (0~3).
Forced Account Code Toll Call
Setup
Enable Account Codes for all calls or
just toll calls (for mode 2 or 3 in Item
01 above).
Account Codes for Incoming Calls
Allow users to enter Account Codes
for incoming calls. If disabled, any
code entered dials out on the
connected trunk.
Hiding Account Codes
Hide or show the Account codes on a
telephone display.

35-05 : Account Code Setup

to set various Account Code options for an
01~15
Input Data
0 = Account Codes Disabled (None)
1 = Account Codes optional
2 = Account Codes Required but not
verified (No verify)
3 = Account Codes Required and
Verified (Verify)
0 = Account Codes for toll and local calls
All)
1 = Account Codes just for toll calls
(STD)
0 = Account Codes for incoming calls
disabled (No)
1 = Account Codes for incoming calls
enabled (Yes)
0 = Account Codes displayed
1 = Account Codes not displayed
Program 35 : SMDR Account Code Setup
UNIVERGE SV8100
Default
0
0
0
0