NEC UNIVERGE SV8100 Programming Manual page 590

Issue 11.0 UNIVERGE SV8100
Input Data (Continued)
Item
Item Input Data Default
No.
08 Delay in Dialing Digital Pager 0~99 (sec) 30
Callback Number
(Pager Dial Delay)
Set the delay that occurs just
before SV8100 InMail dials the
Digital Pager Callback Number
portion of the Message
Notification callout number for a
digital pager. Set this delay so the
pager service has enough time to
connect to the digital pager
before sending the callback
number. Your pager service may
be able to help you determine the
best value for this option. When
placing a digital pager
notification, the system:
Seizes the trunk specified.
Dials the user-entered
notification number (in Message
+ OP + N).
Waits the 47-01-08: Delay in
Dialing Digital Pager Callback
Number interval.
Dials the number entered in
47-01-07: Digital Pager
Callback Number.
The system assumes that the
notification number completes
dialing approximately 4 seconds
after trunk seizure. This means
that, by default, the Digital Pager
Callback Number is dialed into
the pager service about 13
seconds after trunk seizure.
2 - 548 Program 47 : In-Mail