Internal Paging Group Assignment - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to
Internal Paging Groups (i.e., Page Zones). The setting in this program also
determines if the Internal Page Group can receive Internal All Call Paging. The
system can have up to 64 paging groups. An extension can be in only one Internal
Paging Group.
Input Data
Feature Cross Reference

SV8100 Programming Manual

31-02 : Internal Paging Group Assignment

Extension Number
Item
No.
01 Internal Paging Group Number
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The system
allows up to 64 Internal Paging Groups. An
extension can be in only one Internal
Paging Group.
02 Internal All Call Paging Receiving
Allow/Prevent All Call Internal Paging for
each extension. If allowed, extension can
place and receive All Call Internal Paging
announcements. If prevented, extensions
can make only (not receive) All Call
Internal Paging announcements. If
combined, Paging zones should be
restricted as well, change the internal page
zone group in Program 31-07-01 to 0.
Conditions
None
Paging, Internal
Program 31 : Paging Setup
Item
0~64
(0 = No Setting)
0 = Off
1 = On
Maximum eight digits
Input Data Default
0 for IP Station
1 for TDM Station
Issue 11.0
0
2 - 427