Dial Analysis Table For Ars/Lcr - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables
for selecting Automatic Route Selection (ARS).


Input Data
Item
Item
No.
01 Dial
02 ARS Service
Type
03 Additional Data /
Service Number
04 ARS Class of
Service
05 Dial Treatment
for ARS
06 --- Not Used ---
SV8100 Programming Manual

26-02 : Dial Analysis Table for ARS/LCR

Service Type 1 (Route to Trunk Group Number) – The number routes to a trunk
group.
Service Type 2 (F-Route Selected) – The number is controlled by the F-Route table.
Dial Analysis Table Number
Dial Digits (16 digits maximum)
1~9, 0,  , #, or for wild character (Press line key 1)
0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
If Service Type 1 (in 26-02): Select Trunk Group Number
[0~100, 101~150 (100+Networking ID), 0= No Route]
If Service Type 2 (in 26-02):
F-Route Time Schedule Not Used = 0~500
(F-Route Table Number).
Refer to Program 44-05 : ARS/F-Route Table on page
F-Route Time Schedule Used = 0~500
(F-Route Selection Number).
Refer to Program 44-04 : ARS/F-Route Selection for Time
Schedule on page
0~16
0~15
Program 26 : ARS Service
Input Data
2-528.
1~800
Related
Default
Programming
No
Setting
0
0
2-529.
0
0
Issue 11.0
44-04
44-05
2 - 403