Incoming Virtual Extension Ring Tone Order Setup - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0

15-10 : Incoming Virtual Extension Ring Tone Order Setup

Level:
SA
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set
the priority (1~4) for the Virtual Extension Ring Tones set in Program 15-08. When
Virtual Extension calls ring an extension simultaneously, the tone with the highest
order number (e.g., 1) rings. The other keys only flash. There are 256 Virtual
Extension ports.
Input Data
Item
No.
01
2 - 204
Program 15 : Extension, Basic Setup
Extension Number
Priority
Order
1~4 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
Default
By default, Virtual Extension ring tones have the following order:

Priority Ring Tone
Order (Set in Program 15-08)
1 0 (Tone Pattern 1)
2 1 (Tone Pattern 2)
3 2 (Tone Pattern 3)
4 3 (Tone Pattern 4)
Data
When two or more virtual
extensions are set on a
function key on the telephone,
and the tone pattern by which
the sound of each extension
differs, the priority of ring
sound is set up.
Program 15 : Extension, Basic Setup
UNIVERGE SV8100
Up to eight digits
Description
Related
Program
15-08