Netlink Primary Compulsion Specification Setting - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0

51-07 : NetLink Primary Compulsion Specification Setting

Level:
IN
Description
Use Program 51-07 : NetLink Primary Compulsion Specification Setting to set
compulsion specification of the Primary system.
Input Data
Item
No.
01
02
Feature Cross Reference
None
2 - 642
Forced Change Primary System Enabling
Set whether or not the Forced Change Primary
is available.
Package Reset Timing Option
When Forced Change Primary System is done,
all packages reset. Select the package reset
timing.
0 = Reset when all packages are idle, otherwise
reject Primary System Integration.
1 = Anytime
Conditions
None
Program 51 : NetLink Service
Item
UNIVERGE SV8100
Input Data
0 = Disable
1 = Enable
0 = On
1 = Off
Program 51 : NetLink Service
Default
1
0