Vrs Delayed Message For Department Group - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100

22-15 : VRS Delayed Message for Department Group

Level:
IN
Description
Use Program 22-15 : VRS Delayed Message for Department Group to define for
each Department (Extension) Group the timers, VRS message number and tone kind
for VRS Delayed Message. There are 64 available Department Groups.
Input Data
SV8100 Programming Manual
Program 22 : Incoming Call Setup
Extension Group Number
Item
Item
No.
st
01 1 Delayed Message Start Time
Time before the VRS Delay Message is
played for Department Group.
st
02 1 Delayed Message Number
VRS message that is used for the 1st
Delayed Message.
st
03 1 Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st
Delay Message is not played.
nd
04 2 Delayed Message Number
VRS message that is used for the 2nd
Delayed Message.
nd
05 2 Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd
Delay Message is not played.
06 Tone Kind at Message Interval
What is heard between the Delay
Messages.
07 Disconnect Time After the End of VRS
Delayed Message
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
01~64
Input Data Default
0~64800 (sec)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 = No Disconnect
1~64800 (sec)
Issue 11.0
0
0
0
0
0
0
60
2 - 361