NEC UNIVERGE SV8100 Programming Manual page 240

Issue 11.0
Function
Function
Number
 02 Trunk Group
 03 Virtual Extension Key
 04 Park Key
 05 LoopKey
Trunk Access Via
 06
Networking
 07 Station Park Hold None
 08 CAP Key
 10 ACD Log-In/Log-Out
 12 ACD Emergency Call
 13 ACD Off Duty Mode
 14 ACD Start/End
ACD Terminal Speech
 15
Monitor
 16 ACD Waiting
 17 ACD Work Wrap Up Time
 18 ACD Overflow Control
ACD Queue Status
 19
Display Check
2 - 198
Function Number List (Continued)
[2] Appearance Function Level (*00 ~*99) (Service Code 752)
Trunk Group Number
Extension Number or
Department Group Number
Park Number (01~64)
1:Outgoing, 2:Both)
Network System Number
CAP Orbit No. (0001~9999)
If CAP Orbit No.0000 is
used, the next available
orbit is automatically
ACD Group Number
Additional Data
(001~100)
0~2 (0:Incoming,
(01~50)
selected.
UNIVERGE SV8100
LED Indication
Red On: Trunk Busy by Another User
Green On: Trunk Busy by Extension
Red On: Trunk busy by another user
Slow Blink (Red): Incoming Call
Slow Blink (Red): Call Placed in
Park by Another User
Fast Blink (Green): Extension
Placed Call in Park
Green On: Extension on an active
call.
Red On: Under log-on
Off: Under log-off
Red On: Under monitor, Override,
Standby
Fast Blink (Red): Supervisor
Telephone Receiving Emergency Call
Red On: Under Off Duty
Slow Blink (Red): Under Reservation
Red On: ACD Operation End
Red On: Under Monitor
Red On: Standby
Red On: Under Work Time
Slow Blink (Red): Under Reservation
Red On: Enable
Slow Blink (Red): Disable
Program 15 : Extension, Basic Setup