Chapter 1 Introduction; Before You Start Programming; How To Use This Manual; Section 3 How To Enter Programming Mode - NEC UNIVERGE SV8100 Programming Manual

Introduction
B
S 1
EFORE
ECTION
This chapter provides you with detailed information about the system
programs. By changing a program, you change the way the feature
associated with that program works. In this chapter, you find out about
each program, the features that the program affects and how to enter the
program data into system memory.
H
S 2
OW TO
ECTION
This section lists each program in numerical order. For example, Program
10-01 is at the beginning of the section and Program 92-01 is at the end.
The information on each program is subdivided into the following
headings:
Description describes what the program options control. The Default
Settings for each program are also included. When you first install the
system, it uses the Default Setting for all programs. Along with the
Description are the Conditions which describe any limits or special
considerations that may apply to the program.
The reverse type (white on black) just beneath the Description heading is
the program access level. You can only use the program if your access
level meets or exceeds the level the program requires. Refer to
How to Enter Programming Mode on page 1-2
access levels and passwords.
SV8100 Programming Manual
Y S P
OU TART ROGRAMMING
Before customizing your system be sure to read this chapter
first.
U T M
SE HIS ANUAL
Section 3
for a list of the system
1
1 - 1