NEC UNIVERGE SV8100 Programming Manual page 275

UNIVERGE SV8100
Input Data (Continued)
Item
Item
No.
15 Caller ID Display Mode
18
Dialing Record Display Time
19 Virtual Extension Mode
Set the mode of a virtual extension
key that appears on a DSS console.
23 Phone Operation Mode
Selects the Loop Key operation like
the UX5000 terminal, or the CAP Key
operation like the SV8100 terminal.
26 F-Route Outgoing Mode From
Incoming Call History
Enable or Disable the ability to route
Calls in the Call History via F-Route if
the leading digit(s) are set to F-Route.
If set to 0 (Off), all Calls are routed via
Normal Trunk Routing.
If Set to 1 (On), if the leading digit(s)
are set to F-Route in PRG 11-01 or
11-20 the call will follow that F-Route
Programming.
27 ACD Monitor for Business Mode
Select whether or not Call Monitor
provided in ACD Mode works in
normal business mode.
Feature Cross Reference

SV8100 Programming Manual
0 = Name and Number (Both)
1 = Name
2 = Number
0~64800 seconds
0 = No
1 = Yes
0 = Original Operation Mode (CAP Key)
1 = UX5000 Special Operation Mode (Loop
Key)
0 = Off
1 = On
0 = Off
1 = On
Conditions
None
None
Input Data
Issue 11.0
Related
Default
Programming
0
30
0
0
0 11-01
11-20
0
2 - 233