NEC UNIVERGE SV8100 Programming Manual page 266

Issue 11.0
2 - 224
Item
Item
No.
04
Hunting Mode
Set the action taken when a call
reaches the last extension in the
Department Group (0 = hunting
stopped, 1 = hunting repeats
with circular routing through the
Department Group).
05 Extension Group All Ring
Mode Operation
Determine whether calls ringing
a Department Group should ring
all extensions in the group
simultaneously automatically or
manually when using the
service code defined in Program
11-12-09.
 When set to (1)
Automatic, only ICM
Calls and DID Calls will
ring all the stations in the
Department Group.
06 STG Withdraw Mode
07 Call Recall Restriction for
STG
Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred.
08 --- Not Used ---
09 Department Hunting No
Answer Time
Set the time a call rings a
Department group extension
before hunting occurs.
10 Enhanced Hunt Type
Set the type of hunting for each
Extension (Department) Group.
Input Data
0 = Last extension is
called and hunting is
stopped
1 = Circular
0 = Manual
1 = Automatic
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
0 = Disable (Recall)
1 = Enable (No Recall)
0~64800 seconds
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy
or No Answer
Program 16 : Department Group Setup
UNIVERGE SV8100
Related
Default
Program
0
0 11-16-10
0
0
15
0