Mobile Extension Setup - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 15-22 : Mobile Extension Setup to set the system information for the
Mobile Extension feature.
Input Data
Item
No.
01
02
03
04
2 - 216
Program 15 : Extension, Basic Setup
Extension Number
Item
Mobile Extension Target
Setup
Set which Speed Dial bin
is used to call when the
Mobile extension is
called.
Connect Confirmation
Select when a
confirmation (dial ) is
required to allow the call
to cut over to the called
mobile number.
Trunk Access Code
Select if the Normal or
Individual Trunk access is
used when making the
call to the mobile number.
Call Back
Set up the Call Back for
each Mobile extension
number.

15-22 : Mobile Extension Setup

Input Data
0~1999 (0 = No setting/1~1999 = target of mobile
extension)
0 = Always
1 = On Analog Line
2 = Never
0 = Use normal trunk access code (11-09-01)
1 = Use individual trunk access code (11-09-02)
0 = Disable
1 = Enable
Program 15 : Extension, Basic Setup
UNIVERGE SV8100
Up to eight digits
Default
0
0
0
0