Dt700 Multiline Logon Information Setup - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 84-22 : DT700 Multiline Logon Information Setup to set the DT700
Multiline logon information.
Input Data
Input Data
SV8100 Programming Manual
Program 84 : Hardware Setup for VoIP

84-22 : DT700 Multiline Logon Information Setup

Personal ID Index
Item
No.
01 User ID
Input the User ID when using manual or auto
registration (10-46-01).
02 Password
Input the Password when using manual or
auto registration (10-46-01).
 IP Multiline terminals only support
numerical user IDs, not alphanumeric.
03
User ID Omission
Input the Personal ID from terminal
automatically when log on again.
04 Log Off
When the registration mode (10-46-01) is set
to manual, and the phone prompts for a login,
the previous user ID appears so the user only
has to enter the password.
When enabled, the extension assigned to the
Personal ID Index can be logged off or
overridden by another IP multiline station or
Softphone.
In Manual mode, a user can also log off the
IP phone to allow another user to login with
their own login ID and password. To logoff
the IP phone use the following operation:
Press the "Down Arrow" Soft Key, press the
"Prog" soft key, and then press the
"LOGOFF" soft key.
Item
1~512
Input Data
Up to 32 characters
Up to 16 characters
0 = Off
1 = On
0 = Off
1 = On
Issue 11.0
Default
No Setting
No Setting
0
1
2 - 789