Acd Voice Mail Delay Announcement - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
SA
Description
Use Program 41-19 : ACD Voice Mail Delay Announcement to assign VM8000
InMail Master Mailboxes (PRG 47-03) as ACD Delay Announcement Mailboxes.
Input Data
Item
No.
2 - 500

41-19 : ACD Voice Mail Delay Announcement

ACD Group Number
01 Delay Message Start Timer
Determine the time the system waits before playing the
Delay Message.
02 Mailbox Number for 1st Announcement Message
Assign the Voice Mail ACD Announcement Mailbox as the
message source for the 1st Announcement Message.
03 1st Delay Message Sending Count
Determine the 1st Delay Message Sending Count. This
entry must be set to 1 or higher for the message to play.
04 Mailbox Number for 2nd Announcement Message
Assign the Voice Mail ACD Announcement Mailboxes as
the message source for the 2nd Announcement Message.
05 2nd Delay Message Sending Count
Determine the 2nd Delay Message Sending Count. This
entry must be set to 1 or higher for the message to play.
06 Wait Tone Type at Message Interval
Determine what the caller hears between the messages.
07 ACD Forced Disconnect Time after 2nd
Announcement
Assign the time the system should wait after the end of
the ACD Delay Message before disconnecting.
Program 41 : ACD Setup
Item
UNIVERGE SV8100
1 ~ 64
Input Data Default
0 ~ 64800 (sec)
Dial No Setting
(up to eight digits)
0 = No message is
played.
1 ~ 255
Dial No Setting
(up to eight digits)
0 = No message is
played.
1 ~ 255
0 = Ring Back
Tone
1 = Music On Hold
Tone
2 = Background
Music Source
0 ~ 64800 (sec)
Program 41 : ACD Setup
0
0
0
0
0