Isdn Bri & Pri Layer 3 (T-Point) Timer Setup - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Program 81 : Basic Hardware Setup for Trunk
81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup
Level:
IN
Description
Use Program 81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup to define the
various basic timers for layer 3 of ISDN BRI/PRI (defined in Program 10-03-04).
Input Data
Item
No.
SV8100 Programming Manual
Layer 3 Timer Type Number
Item
01 T301 Specify the timer value started when
the ALERT message is received.
02 T302 Specify the timer value started when
the SETUP ACK is sent. Timer is also
restarted when INFO is received.
03
T303 Specify the timer value started when
SETUP is sent.
04 T304 Specify the timer value started when
the SETUP ACK is received. Timer is
also restarted when INFO is received.
05 T305 Specify the timer value started when
DISC without progress No. 8 is sent.
06 T306 Specify the timer value started when
DISC with progress indicator No. 8 is
sent. This timer is valid for Network
side use only.
07 T307 Specify the timer value started when
SUSPEND ACK is sent. This timer is
valid for Network side use only.
08 T308 Specifies the timer value started when
REL is sent.
09 T309 Specify the timer value started at data
link disconnection.
10 T310 Specify the timer value started when
CALL PROC is sent.
11
T312 Specify the timer value started when
SETUP is sent or re-sent on
broadcast data link. This timer is valid
only for Network side use only.
Description
1~5
Input Data
0,180~254 (sec)
1~254 (sec)
1~254 (sec)
0~254 (sec).
1~254 (sec)
0~254 (sec)
1~254 (sec)
1~254 (sec)
1-254 (sec)
0~180 (sec)
1~254 (sec)
Issue 11.0
Default
180
15
4
30
30
30
180
4
90
180
6
2 - 689