External Speaker Control - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 31-06 : External Speaker Control to define the settings for the
external speaker using an amplifier.
Input Data
Item
SV8100 Programming Manual
External Speaker Number
Item
No.
01 Broadcast Splash Tone Before
Paging (Paging Start Tone)
Enable/Disable splash tone before
Paging over an external zone. If
enabled, the system broadcasts a
splash tone before the External
Paging announcement.
02 Broadcast Splash Tone After
Paging (Paging End Time)
Enable/Disable splash tone after
Paging over an external zone. If
enabled, the system broadcasts a
splash tone at the end of an
External Paging announcement.
03 Speech Path
Determine if the external speaker
is used for talkback (As this option
is not available with the
CD-CP00-US external page zone,
speaker 9 should be left at 1).
04 CODEC Transmit Gain Setup
05 CODEC Receive Gain Setup
Program 31 : Paging Setup

31-06 : External Speaker Control

Input Data
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
0 = Both Way (Duplex)
1 = One Way (PGD(2)-U10 ADP 
SPK) (Simplex)
1~63 (-15.5 ~ +15.5dB)
1~63 (-15.5 ~ +15.5dB)
Issue 11.0
1~9
Default
2
2
1
32
32
2 - 433