NEC UNIVERGE SV8100 Programming Manual page 234

Issue 11.0
Item
No.
01
Function
Function
Number
00 Not Defined
01 DSS/One-Touch
02 Microphone Key (ON/OFF)
03 DND Key
04 BGM (ON/OFF)
05 Headset
06 Transfer Key
07 Conference Key
08 Incoming Call Log
09 Day/Night Mode Switch
10 Call Forward – Immediate
2 - 192
Line Key
Number
1~48 0~99
(Normal Function Code) (Service Code 751 by
default)
* 00 ~ *99
(Appearance Function Code) (Service Code 752 by
default)
Default
Programmable keys 1~8 are Trunk Line keys (key 1 = Trunk Line 1, key 2 = Trunk Line 2,
etc.). All other programmable keys are undefined.
Function Number List
[1] Normal Function Code (00 ~ 99) (Service Code 751)
Function Number List
[1] Normal Function Code (00 ~ 99) (Service Code 751)
Extension number or any
numbers (up to 24 digits)
Mode number (1~8)
Function Number
Additional Data
UNIVERGE SV8100
Additional Data
Refer to
Number
LED Indication
Red On: Extension Busy
Off: Extension Idle
Rapid Blink (Red): DND or Call
Forward
Red On: Mic Off
Off: Mic On
Red On: DND
Red On: BGM On
Off: BGM Off
Red On: Headset in use
None
Red On: Conference call setup
occurring
Rapid Blink (Red): New call log
Red On: Call log
Off: No call log
Red On: Mode active
Red On: Forwarded
Program 15 : Extension, Basic Setup
Function
List.