System Options For Transfer - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 24-02 : System Options for Transfer to define the system options for
the Transfer feature.
Input Data
Item
No.
01
02
03
04
05
SV8100 Programming Manual
Program 24 : Hold/Transfer Setup

24-02 : System Options for Transfer

Item
Busy Transfer
Enable/Disable extensions to Transfer calls to
busy extensions. If disabled, calls transferred to
busy extensions recall immediately.
MOH or Ringback on Transferred Calls
Enable/Disable MOH on Transfer. If set to 0, a
transferred caller hears MOH while their call
rings the destination extension. If set to 1, a
transferred caller hears ringback while their call
rings the destination extension.
Delayed Call Forwarding Time
If activated at an extension, Delayed Call
Forwarding occurs after this time. This also sets
the time a Transferred call waits at an extension
forwarded to Voice Mail before routing to the
called extension mailbox.
Transfer Recall Time
An unanswered transferred call recalls to the
extension that initially transferred it after this
time.
Message Wait Ring Interval Time
For single line telephones (SLTs) without
message waiting lamps, this is the time between
intermittent ringing. If this value is set to 0, the
system rings once.
Input Data Default
0 = Disable (No) 1
1 = Enable (Yes)
0 = Hold Tone 0
1 = Ring Back
Tone
0~64800 (sec) 10
0~64800 (sec) 30
0~64800 (sec) 30
Issue 11.0
Related
Program
20-03-02
2 - 373