NEC UNIVERGE SV8100 Programming Manual page 302

Issue 11.0
Item
No.
31 Connected Line Identification (COLP)
32 Deny Multiple Barge-Ins
Allow/Deny an extension user from having multiple
users Barge into their conversation.
33 ACD Supervisor's Position Enhancement
This option must be set to 1 for the operator to use
service codes in Program 11-13-10 ~ 11-13-13.
34 Block Manual Off-Hook Signaling
Turn off or on an extension user ability to block off-hook
signals manually sent from a co-worker.
35 Block Camp On
Turn off or on an extension user ability to block callers
from dialing to Camp On.
36 Call Duration Timer Display
Turn off or on an extension display of the Call Duration
Time. The system waits until the interdigit time
(Program 21-01-01) expires before beginning this timer.
37 --- Not Used ---
38 Headset Ringing for SLT
Turn off or on an extension user ability to use the
Headset ringing.
39 ACD Queue Status Display
Turn off or on the ACD Queue Status Display for an
extension Class of Service. Any extension which has
this option enabled also receives the queue alarm.
40 Do Not Disturb
Turn off or on an extension user ability to set or cancel
Do Not Disturb.
41 Voice Mail Message Indication on DSS
Turn off or on the Voice Mail Message Indication for an
extension on a DSS console.
42 Extension Data Swap Enabling
Turn off or on an extension user ability to use Extension
Data Swap.
43 --- Not Used ---
2 - 260
Item
Default
Input Data
COS
01~14
0 = Off
0
1 = On
0 = Off
1 = On 0
0 = Off
1 = On
0
0 = Off
1 = On 0
0 = Off
1 = On 0
0 = Off
1 = On
1
0 = Off
1 = On 0
0 = Off
1 = On
0
0 = Off
1 = On 1
0 = Off
1 = On 0
0 = Off
1 = On 1
Program 20 : System Option Setup
UNIVERGE SV8100
Related
Programming
COS
15
0
0
11-13-10
11-13-11
0
11-13-12
11-13-13
0
0
1
0
0
11-11-08
1
15-07-03
0
1 11-15-12