NEC UNIVERGE SV8100 Programming Manual page 582

Issue 11.0
Input Data (Continued)
Item
No.
07
08
09
10
11
12
13
14
15
16
17
18
19
2 - 540
Item
Centralized Voice Mail Pilot Number
Assign this number the same as the extension
number or pilot number.
Centralized Voice Mail Department Group
Number
Assign which Extension (Department) Group
Number is used as the Centralized Voice Mail
group.
Centralized Voice Mail Master Name
Assign the Centralized Voice Mail Master
Name.
New NSL Protocol support
Prefix for Call Screening
Prefix for Park and Page
Prefix for Message Wait
CCIS Centralized Voice Mail Number
Assign the pilot number to Centralized Voice
Mail over CCIS Link. This is assigned only in
the remote switches.
Analog Voice Mail Protocol Selection
Assign whether fixed codes or the codes used
in PRG 45-04 are used for analog voice mail
protocol.
Voice Mail Fax Digit Add Assignment
Assign up to four digits in front of the station
number sent to the SLT port when a call is
forwarded.
Reply Mailbox Number
Select whether or not to include the mailbox
number in the analog voice mail protocol.
Trunk Number Mapping
Assign the digits of trunk number mapping.
Centralized Voice Mail Type
Assign which Centralized Voice Mail types to
use, Retro (Aspire) or Enhanced (Cygnus).
UNIVERGE SV8100
Input Data
Dial (up to eight No Setting
digits)
0~64
Up to 12 characters
0 = Off
1 = On
Dial (One digit)
Dial (One digit)
Dial (One digit)
Dial (up to eight No Setting
digits)
0: Fixed
1: Program
Up to four digits
0: No
1: Yes
2~3
0 = Retro
1 = Enhanced
Program 45 : Voice Mail Integration
Default
0
"C.V.M."
0
1

#
0
None
1
2
0