Sip System Information Setup - NEC UNIVERGE SV8100 Configuration Manual

Issue 1.0
3.4
12

SIP System Information Setup

Values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 7 SIP System Information Setup
10-28-01 : SIP System Information Setup – Domain Name
Define the Domain name up to 64 characters. This information is specific to your
market and is provided by your SIP trunking service provider.

When configuring Domain name the SIP service provide will supply the Proxy/Domain in
the following manner - "Host Name" . "Domain Name" . The characters are normally
separated by "." The characters after "." will be in the Domain Name.
10-28-02 : SIP System Information Setup – Host Name
Define the Host name, up to 48 characters. This information is Windstream-
specific and is "sipconnect-fca".

When configuring Host name the SIP service provide will supply the Proxy/Domain in the
following manner - "Host Name" . "Domain Name" . The characters are normally
separated by "." The characters before "." will be in the Domain Name.
10-28-03 : SIP System Information Setup – Transport Protocol
Define the Transport type. This option is always set to 0 (UDP).
10-28-04 : SIP System Information Setup – User ID
This information is provided by your Windstream SIP trunk service provider.
Entries: 32 characters maximum (Default=No Entry)

Typically the ten digit billing telephone number is used. This entry must be numeric as
Program 10-23-04 does not allow text entry - only numeric.
10-28-05 : SIP System Information Setup – Domain Assignment
Determine the type of Domain Assignment. Set this entry to 0 (IP Address).
SIP Trunking Service Configuration Guide
Windstream