How To Exit Programming Mode - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Password
12345678
H
S 4
OW TO
ECTION
To exit the programming mode:
When you are done programming, you must be out of a program option to exit
(pressing the Answer key will exit the program option).
1.
2.
3.
SV8100 Programming Manual
User
Name
47544 necii
tech
0000 ADMIN1
9999 ADMIN2
E P
XIT ROGRAMMING
Press Answer key to exit the program options, if needed.
Program Mode
Base Service OP1 OP2
Press Speaker. If changes were to the system programming, "Saving System
Data" is displayed.
The display shows "Complete Data Save" when completed and exits the
telephone to an idle mode.
 To save a customer's database, a blank USB Drive is required. Insert the USB Drive into
the CD-CP00-US and, using Program 90-03, save the software to the USB Drive.
(Program 90-04 is used to reload the customer data if necessary.) Note that a USB Drive
can only hold one customer database. Each database to be saved requires a separate
drive.
Level
1 (MF) Manufacturer (MF):
All programs
2 (IN) Installation (IN):
All programs in this section not listed below for SA and
SB
3 (SA) System Administrator – Level 1 (SA):
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17,
10-18, 10-22, 12-02, 12-03, 12-04, 15-01, 15-07, 15-09,
15-10, 15-11, 20-16, 21-07, 21-14, 22-04, 22-11, 25-08,
30-03, 32-02, 40-02, 41-02, 41-03, 41-04, 41-05, 41-06,
41-07, 41-08, 41-09, 41-10, 41-11, 41-12, 41-13, 41-14,
41-15, 41-16, 41-17, 41-18, 90-03, 90-04, 90-06, 90-07,
90-18, 90-19
4 (SB) System Administrator – Level 2 (SB):
13-04, 13-05, 13-06
M
ODE
Programs at this Level
Issue 11.0
1 - 3