NEC UNIVERGE SV8100 Programming Manual page 883

UNIVERGE SV8100
Alarm
Type Report
No.
6 0 0 Blocking
7 1 0 Power failure
8 1 0 RAM Backup
Battery Error
9 --- Reserved ---
10 0 0 ISDN Link
Error
11 0 0 CTI Link Error
12 0 0 ACD MIS Link
Error
SV8100 Programming Manual
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
The link of terminals
connected with the ESI
package came off.
The supply of the
commercial power
stopped.
RAM backup battery on the
CD-CP00-US blade is
unplugged or defective.
Layer1 link of ISDN lines
came off.
The link with the CTI server
came off.
The link with ACD MIS
client PC came off.
Cause Action
1. Terminal 1. Confirm the terminal
breakdown. connected with
2 Faulty wiring and same ESI. If they
wiring work normally,
termination. confirm the
3. External noise. breakdown or the
4. ESI package wiring for the
Breakdown. terminal.
2. Exchange the
terminal that doesn't
work and the
working terminal,
and confirm it's
working. An external
factor of the noise
etc. is thought.
3. Confirm wiring and
the installation,etc.
4.Check with
manufacturer if the
problem occurs
again.
1. The power cable 1. Confirm the power
came off. supply outlet when
2. Power failure the commercial
3. The power power has not
supply broke stopped.
down. 2. Check with the
manufacturer if the
problem occurs
again.
Check the battery
connector. If it is
connected correctly,
replace the battery.
1. Check 1. Confirm the data of
connection PRG10-03.
between main 2. Confirm wiring and
device and ISDN installation of DSU.
line. 3. Check with the
2. DSU breakdown manufacturer if the
3. The setting of problem occurs
PRG10-03 does again.
not correspond
to an actual line.
1. LAN cable 1. Confirm the CTI
defective. server, wiring, and
2. Connected HUB the connection.
broken. 2. Check with
3. The CTI server manufacturer if the
doesn't start problem occurs
normally. again.
1. LAN cable 1. Confirm ACD MIS
defective. client PC and
2. Connected HUB connected part.
broken. 2. Check with
3. The CTI server manufacturer if the
doesn't start problem occurs
normally. again.
Issue 11.0
Alarm
Recovery
Status
The error is ERR
recovered
REC
when
connecting or
exchanging it.
When the ERR
commercial
REC
power is
restored, the
error is
recovered.
The error is ERR
recovered
REC
once the
battery is
replaced.
When the ERR
connection
REC
returns
normally, the
error is
recovered.
When the ERR
connection
REC
returns
normally, the
error is
recovered.
When the ERR
connection
REC
returns
normally, the
error is
recovered.
2 - 841