NEC UNIVERGE SV8100 Programming Manual page 458

Issue 11.0
Function
Function
Number
39 Room Monitoring
40 Handset Transmission
Cutoff
41 Secretary Buzzer
42 Boss – Secretary Call
Pickup
43 Series Call
44 Common Hold
45 Exclusive Hold
46 Department Group Log Out
47 --- Not Used ---
48 --- Not Used ---
49 Call Redirect
50 Account Code
51 General Purpose Relay
52 Automatic Answer with
Delay Message Setup
53 Automatic Answer with
Delay Message Starting
54 External Call Forward by
Door Box
55 Extension Name Edit
56 General Purpose LED
Operation
2 - 416
Function Number List (Continued)
[1] General functional level (00~99)
Additional Data
Extension Number
Extension Number
Extension Number or Voice
Mail Number
Relay No (0, 1~8)
Incoming Group Number
001~100: (Red)
UNIVERGE SV8100
LED Indication
Rapid Blink (Red): Under Monitored
Slow Blink (Red): Under Monitoring
With Room Monitor there are two parties
in the monitor, one being monitored and
one who is monitoring. The same key is
used on both phones, but the COS says
if the key is set to be either a monitored
or monitoring party.
Red On: Transmission cut-off
Red On: Transmission Side
Rapid Blink (Red): Receiver Side
Red On: Boss – Secretary Mode
None
None
None
Red On: Logged Out
None
None
Red On: Relay On
Red On: Under Setting
Red On: Active
Red On: Active
None
001~100: Rapid Blink (Red)
Rapid Blink (Green)
101~200:
Red On, Green Rapid Blink
201~300:
Program 30 : DSS/DLS Console Setup