Program 22 : Incoming Call Setup; System Options For Incoming Calls - NEC UNIVERGE SV8100 Programming Manual

Level:
IN
Description
Use Program 22-01 : System Options for Incoming Calls to define the

system options for incoming calls.

Input Data
Item
Item
No.
01 Incoming Call
Priority
02 Incoming Call
Ring No Answer
Alarm
03 Ring No Answer
Alarm Time
04 DIL No Answer
Recall Time
05 --- Not Used ---
06 DID Ring-
No-Answer Time
07 DID Incoming
Ring Group No
Answer Time
SV8100 Programming Manual

Program 22 : Incoming Call Setup

22-01 : System Options for Incoming Calls
Input Data Default
0 = Intercom Call 1
Priority
1 = Trunk Call
Priority
0 = Disable (Off) 0
1 = Enable (On)
0~64800 (sec) 60
0~64800 (sec) 0
0~64800 (sec) 20
0~64800 (sec) 20
Description
Determine if Intercom calls or trunk
calls have answer priority when both
are ringing simultaneously.
If enabled, an incoming call that rings
longer than the Ring No Answer Alarm
(22-01-03), changes to a unique ring
cadence to indicate that the call has
been ringing too long. If disabled, this
does not occur.
If a trunk rings a multiline telephone
longer than this time, the system
changes the ring cadence. This
indicates to the user that the call has
been ringing too long.
A DIL that rings its programmed
destination longer than this time diverts
to the DIL No Answer Ring Group (set
in Program 22-08).
In systems with DID Ring-No-Answer
Intercept, this sets the Ring-No-Answer
time. This is the time a DID call rings
the destination extension before
rerouting to the intercept ring group.
Program
22
Related
Program
15-02-22
22-01-03
22-01-04
22-01-02
22-12
2 - 337