NEC UNIVERGE SV8100 Programming Manual page 294

Issue 11.0
Item
No.
2 - 252
08 Transfer Information Display
Turn off or on an extension ability for incoming
Transfer preanswer display.
09 Group Hold Initiate
Turn off or on an extension user ability to initiate a
Group Hold.
10 Group Hold Answer
Turn off or on an extension user ability to pick up a
call on Group Hold.
11 Automatic On-Hook Transfer
Turn off or on an extension user ability to use
Automatic On Hook Transfer.
12 Call Forwarding Off Premise (External Call
Forwarding)
Turn off or on an extension user ability to set up Call
Forwarding Off-Premise for their telephone.
13 Operator Transfer After Hold Callback
Turn off or on an extension user ability to have a call
which recalls from hold transfer to the operator.
14 Trunk-to-Trunk Transfer Restriction
Turn off or on the Trunk-to-Trunk Transfer Restriction.
If enabled, Trunk-to-Trunk Transfer is not possible.
15 VRS Personal Greeting (Message Greeting)
Turn off or on an extension user ability to record,
listen to, or erase the Personal Greeting Message.
16 Call Redirect
Turn off or on a multiline terminal user ability to
transfer a call to a predefined destination (such as an
operator, voice mail, or another extension) without
answering the call.
17 Department Group Trunk-to-Trunk Transfer (Each
Telephone Group Transfer)
Turn off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department Group.
Item
UNIVERGE SV8100
Input Data
COS
01~14
0 = Off
1 = On 1
0 = Off
1 = On 1
0 = Off
1 = On 1
0 = Off
1 = On 0
0 = Off
1 = On
0
0 = Off
0
1 = On
0 = Off
0
1 = On
0 = Off
1
1 = On
0 = Off
1 = On
1
0 = Off
1 = On
1
Program 20 : System Option Setup
Default
COS
15
1
1
1
0
0
0
0
1
1
1