NEC UNIVERGE SV8100 Programming Manual page 416

Issue 11.0
Input Data (Continued)
Item
No.
07
08
09
10
11
12
13
15
Feature Cross Reference

2 - 374
Item
Trunk-to-Trunk Transfer Release Warning
Tone
Time starts when a trunk begins talking with
another trunk (for example: trunk-to-trunk
transfer, outgoing from trunk, Tandem Trunking).
When this time expires, a warning tone is heard.
If Program 24-02-10 is set, the conversation
disconnects after time expires. This time is set
again when the external digit timer expires. One
of the trunks used must be an analog trunk (or
leased line).
Delayed Transfer Time for all Department
Groups
Two B-Channel Transfer Retry Timer
Disconnect Trunk-to-Trunk
No Answer Step Transfer
No Answer Trunk-to-Trunk Transfer
Hook Flash Sending Timer When the System
Answers Automatically
Time before sending the hook flash for Call
Forward Centrex.
SIP Out of Range Timer
When not receiving any response within this
timer setting, system determines SIP terminal is
out of range. When set to 0, timer is invalid.
Conditions
None
Transfer
UNIVERGE SV8100
Input Data Default
0~64800 (sec) 1800
0~64800 (sec) 10
0~64800 (sec) 10
0~64800 (sec) 0
0~64800 (sec) 10
0~64800 (sec) 0
0~64800 (sec) 2
0~30 (sec) 4
Program 24 : Hold/Transfer Setup
Related
Program
14-01-25
20-28-01
20-28-02
20-28-03
24-02-10
11-11-28
11-11-29
15-07-59
10-03-16
(PRI)
14-01-25
20-28-01
20-28-02
20-28-03
24-02-07
14-01-26
14-01-26