Sip System Information Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking.
Input Data
Item
No.
Programming Manual

10-28 : SIP System Information Setup

Item
01
Domain Name
This sets the domain
name of the SIP-URL.
02
Host Name
This sets the host name
of the SIP-URL.
03
Transport Protocol
This sets the protocol
for the connection.
04
UserID
User ID in the SIP Invite
Setup message. It is
also used for outbound
caller ID information if
no information is
assigned in commands
21-17, 21-19, 15-16,
14-12, and 10-36. A
call can not be
completed across the
span if there is no
outbound CID info at
all. The reason for this
is: the "from" and
"display" portion of the
invite message would
be blank, and it would
not know where the call
originated from.
Input Data
Up to 64 Characters
(ex.:UserID@HostName.DomainName)
Up to 48 Characters
(ex.:UserID@HostName.DomainName)
0 = UDP
1 = TCP
Up to 32 Characters
When assigning the User ID, the ID may
contain only alpha characters. (A space
and/or special characters are not allowed in
the User ID field).
(ex.:UserID@HostName.DomainName)
Issue 1.0
Default
None
None
0
None
2 - 43