Vm8000 Inmail Station Mailbox Options - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use
mailbox. Station mailboxes are automatically assigned as Subscriber Mailboxes.
Normally, VM8000 InMail Station Mailbox numbers 1~26 should correspond to
extensions 101~126.
Input Data
Input Data
Item
No.
01
02
Programming Manual

47-02 : VM8000 InMail Station Mailbox Options

VM8000 InMail
47-02 :
Station Mailboxes are one of three mailbox categories: Station, Routing, or
Master. You can also set up Master Mailboxes as Subscriber Mailboxes.
Station Mailbox Number
Mailbox Type
Use this option to enable or disable the mailbox. An
extension mailbox is not accessible when it is
disabled (even though its stored messages and
configuration are retained in memory.) If disabled, a
user pressing Message initiates a remote logon and
is asked to enter their mailbox number. A voice
prompt then announces: "That mailbox does not
exist."
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
Mailbox Number
Use this option to select the extension number
associated with the mailbox you are programming.
Normally, mailbox 1 should use Mailbox Number
101, mailbox 2 should use Mailbox Number 102, etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
Program 47 : InMail
Station Mailbox Options
Item
to set up a station/extension
1~512
Input Data
0 = None 1
1 = Personal
2 = Group
Digits (8 maximum, Mailbox 1 = 101
using 0~9) Mailboxes 2~64 =
102~164
Mailboxes 65~512
= No entry
Issue 1.0
Default
2 - 495