Memory Options Menu - NEC Express5800/R120h-1E Manual

P.137
1.24.1 Notes on
Building RAID System
P.174
2.4 Cases that Require
Configuration
- Memory
- Use memory RAS
feature
P.190
1.specifications
- Standard interface
■ Errata Information for Express5800/ R120h-1E, R120h-2E Maintenance Guide
P.2
Manuals
P.8
Abbreviations of
Operating Systems
(Windows)
P.65
7.3.3 Set the System
Configuration Back to
Default Values
P.75
Internal SD Card Slot
P.80
(3)
Memory Options
Menu
P.82
(a) Persistent Memory
Options Menu
P.93
i. (UEFI LAN
Driver)Menu
-Target Name
If the optional RAID Controller (N8103-189/
195) is used, the RAID System cannot be built
in RAID5/RAID6/RAID50/RAID60.
The minimum number of hard disk
drives required to set up a RAID
RAID level
System
N8103-189/195
RAID 0 1
RAID 1 2
RAID 5
RAID 6
RAID 10 4
RAID 50
RAID 60
Set System Configuration >
BIOS/Platform Configuration (RBSU) >
System Options > Memory Oprations -
Advanced Memory Protection
2x LAN (1000BASE-T/100BASE-
TX/10BASE-T, RJ-45)
Error
Storing the electronic edition in Starter Pack
DVD or releasing in the Website
(http://jpn.nec.com/)
Windows Server 2016 Essentials
6. Follow Chapter 1 (7.3.2 Operation
Procedure of System Maintenance Switch)
of this document to set the system
maintenance switch: SW6 back to ON.
[Enabled]
Use this option to enable or dis
able the Internal SD Card Slot. When set to
disabled, the SD card slot is disabled,
regardless of whether an SD Card is installed
or not. The SD Card will not be visible in the
pre-boot environment or under the operating
system.
When you select System Configuration >
BIOS/Platform Configuration (RBSU) > System
Options >
Memory Options from the System Utilities, the
Memory Options menu appears.
When you select System Configuration >
BIOS/Platform Configuration (RBSU) > System
Options > Memory Operations > Persistent
Memory Options from the System Utilities, the
Persistent Memory Options menu appears.
For example:
iqn.2015-02.com.nec:iscsitarget-iscsidisk-
target.
If the optional RAID Controller (N8103-189/
195) is used, the RAID System cannot be built
in RAID6/RAID50/RAID60.
RAID level
N8103-190/201
1
RAID 0
2
RAID 1
3
RAID 5
3
RAID 6
4
RAID 10
6
RAID 50
6
RAID 60
Set System Configuration >
BIOS/Platform
Configuration (RBSU) > Memory Options
- Advanced Memory Protection
2x LAN (1000BASE-T, RJ-45)
The electronic edition has been published on
a website (https://www.nec.com/express/).
Incompatible
6. Follow Chapter 1 (7.3.2 Operation
Procedure of System Maintenance Switch)
of this document to set the system
maintenance switch: SW6 back to OFF.
[Disabled]
This option setting is not currently
supported.The equipment do not support
devices dealing with this option.
This option is set as Disabled as the user
default setting in time of shipment from
factory.
Do not change this item from thedefault
setting.
When you select System Configuration >
BIOS/Platform Configuration (RBSU) >
Memory Options from the System Utilities, the
Memory Options menu appears.
When you select System Configuration >
BIOS/Platform Configuration (RBSU) >
Memory Options > Persistent Memory Options
from the System Utilities, the Persistent Memory
Options menu appears.
For example:
iqn.2015-02.com.nec:iscsitarget-iscsidisk-
target
49
The minimum number of hard disk
drives required to set up a RAID
System
N8103-189/195 N8103-190/201
1 1
2 2
3 3
4
4 4
6
8
Correct