22-15: Vrs Delayed Message For Department Group - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 22-15: VRS Delayed Message for Department Group to define for
each Department (Extension) Group the timers, VRS message number and tone kind
for VRS Delayed Message. There are 64 available Department Groups.
Input Data
Item
No.
2 - 366
Program 22 : Incoming Call Setup

22-15: VRS Delayed Message for Department Group

Extension Group Number
st
01
1 Delayed Message Start Time
Time before the VRS Delay Message is played for
Department Group.
st
02
1 Delayed Message Number
VRS message that is used for the 1st Delayed
Message.
st
03
1 Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st Delay
Message is not played.
nd
04
2 Delayed Message Number
VRS message that is used for the 2nd Delayed
Message.
nd
05
2 Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd Delay
Message is not played.
06
Tone Kind at Message Interval
What is heard between the Delay Message.
07
Disconnect Time After the End of VRS Delayed
Message
Time, after all 2nd Delay Messages are played,
before the caller is disconnected.
Item
UNIVERGE SV8100
01~64
Input Data
0~64800 (sec)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 = No Disconnect
0~64800 (sec)
Program 22 : Incoming Call Setup
Default
0
101
0
101
0
0
60