Figure 133: Re-S-1800 Storage Drive Slots - Juniper MX960 Hardware Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.

Figure 133: RE-S-1800 Storage Drive Slots

Auxiliary Ethernet Online/Offline
port port button
Console
Extractor
clip port
The following drive has been verified to work in the RE-S-1800 Routing Engine:
SSD SLC 32 GB
To replace a storage drive:
Disable and deactivate the storage drive.
1.
Remove the storage drive.
2.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and
a.
connect the strap to an ESD point on the appliance.
For more information about ESD, see Preventing Electrostatic Discharge Damage
in the hardware guide for your router.
Unfasten the thumbscrew that secures the access door in front of the storage drive
b.
slots, and open the door.
Slide the lock on the ejector to the unlocked position.
c.
Carefully slide the drive out of the slot.
d.
Reinstall a storage drive.
3.
Carefully align the sides of the drive with the guides in the slot.
a.
Slide the drive into the slot until you feel resistance, carefully ensuring that it is
b.
correctly aligned.
Close the access door and tighten the thumbscrew to secure the door.
c.
Returning a Hardware Component to Juniper Networks, Inc. on page 527
Chapter 24: Replacing Host Subsystem Components
SSD
slot 1
Status LEDs
USB
port
SSD
slot 2
Extractor
clip
337