Lift; Removing The Power Supplies Before Installing An Mx960 Router With A - Juniper MX960 Hardware Manual

MX960 3D Universal Edge Router Hardware Guide
Related
Documentation
Removing Components from the MX960 Router Chassis Before Installing It with a Lift
204
See "Installing the MX960 Router Using a Mechanical Lift" on page
Connect cables to the network and external devices.
6.
See "Connecting the MX960 Router to Management and Alarm Devices" on page
Connect the grounding cable
7.
See "Grounding the MX960 Router" on page
Connect the AC power cord or DC power cables:
8.
Connecting Power to an AC-Powered MX960 Router with Normal-Capacity Power
Supplies on page 227
Connecting Power to a DC-Powered MX960 Router with Normal-Capacity Power
Supplies on page 233
Power on the router:
9.
Powering On an AC-Powered MX960 Router with Normal Capacity Power Supplies
on page 232
Powering On a DC-Powered MX960 Router with Normal Capacity Power Supplies
on page 240
Perform the initial system configuration.
10.
See "Initially Configuring the MX960 Router" on page
MX960 Chassis Description on page 9
Routine Maintenance Procedures for the MX960 Router on page 443
Troubleshooting Resources for MX960 Routers on page 487
Before installing the router with a lift, you must first remove components from the chassis,
and reinstall the components the router is installed in the rack. With components removed,
the chassis weighs approximately 150 lb (68.04 kg).
Removing the Power Supplies Before Installing an MX960 Router with a Lift on page 205
1.
Removing the Standard Cable Manager Before Installing an MX960 Router with a
2.
Lift on page 206
Removing the Fan Trays Before Installing an MX960 Router with a Lift on page 207
3.
4. Removing the SCBs Before Installing an MX960 Router with a Lift on page 209
Removing the DPCs Before Installing an MX960 Router with a Lift on page 210
5.
Removing the FPCs Before Installing the MX960 Router with a Lift on page 212
6.
214.
226.
257.
Copyright © 2017, Juniper Networks, Inc.
247.