Replacing An Ssd Drive On An Re-S-1800; Figure 117: Re-S-1800 Storage Drive Slots - Juniper mx240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

Replacing an SSD Drive on an RE-S-1800

268
MX240 Routing Engine Description on page 23
Effect of Taking the MX240 Host Subsystem Offline
Taking an MX240 Host Subsystem Offline
Replacing Connections to MX240 Routing Engine Interface Ports on page 269
Preventing Electrostatic Discharge Damage to an MX240 Router on page 416
Synchronizing Routing Engines
Each RE-S-1800 Routing Engine supports two solid-state drives (SSD) specified by
Juniper Networks. The RE-S-1800 ships with one SSD installed in the slot labeled
. The spare SSD is Juniper part number RE-SSD-32G-UPG.
SSD 1
shows the arrangement of storage drive slots on a RE-S-1800 Routing Engine.

Figure 117: RE-S-1800 Storage Drive Slots

Auxiliary Ethernet Online/Offline
port
port button
Console
Extractor
clip port
The following drive has been verified to work in the RE-S-1800 Routing Engine:
SSD SLC 32 GB
To replace a storage drive:
Disable and deactivate the storage drive.
1.
SSD
slot 1
Status LEDs
USB
port
Copyright © 2016, Juniper Networks, Inc.
Figure 117 on page 268
SSD
slot 2
Extractor
clip
SATA