Host Subsystem Components And Descriptions; Mx960 Host Subsystem Description - Juniper MX960 Hardware Manual

CHAPTER 5
Host Subsystem Components and
Descriptions

MX960 Host Subsystem Description

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
MX960 Host Subsystem Description on page 27
MX960 Host Subsystem LEDs on page 28
MX960 Midplane Description on page 28
MX960 Routing Engine Description on page 29
MX960 RE-S-1300 and RE-S-2000 Routing Engine LEDs on page 31
RE-S-1800 Routing Engine Description for MX Series on page 31
RE-S-1800 Routing Engine LEDs on page 33
RE-S-X6-64G Routing Engine Description on page 34
RE-S-X6-64G Routing Engine LEDs on page 36
Routing Engine Specifications on page 37
Supported Routing Engines by Router on page 40
The host subsystem provides the routing and system management functions of the
router. You can install one or two host subsystems on the router. Each host subsystem
functions as a unit; the Routing Engine must be installed directly into the Switch Control
Board.
NOTE: We recommend that you install two host subsystems for redundant
protection. If you install only one host subsystem, we recommend that you
install it in slot 0
Each host subsystem has three LEDs that display its status. The host subsystem LEDs
are located in the middle of the craft interface.
MX960 Host Subsystem LEDs on page 28
Maintaining the MX960 Host Subsystem on page 448
Taking an MX960 Host Subsystem Offline
.
27