Juniper MX960 Hardware Manual page 302

MX960 3D Universal Edge Router Hardware Guide
272
CAUTION: Do not let fiber-optic cable hang free from the connector. Do
not allow fastened loops of cable to dangle, which stresses the cable at
the fastening point.
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
Use one of the following methods to bring the DPC online:
12.
Press and hold the corresponding DPC online button on the craft interface until the
green LED next to the button lights steadily, in about 5 seconds.
OK
Issue the following CLI command:
user@host>request chassis fpc slot slot-number online
For more information about the command, see the
CAUTION: After the
removing the DPC again, removing a DPC from a different slot, or inserting
a DPC in a different slot.
You can also verify that the DPC is functioning correctly by issuing the
and
show chassis fpc pic-status
CLI Explorer
LED turns green, wait at least 30 seconds before
OK
commands.
Copyright © 2017, Juniper Networks, Inc.
.
show chassis fpc