Figure 150: Installing An Fpc - Juniper MX960 Hardware Manual

MX960 3D Universal Edge Router Hardware Guide
Related
Documentation
366
Press and hold the FPC online/offline button until the green
button lights steadily, in about 5 seconds. The LEDs and online/offline button for
each FPC are located directly above it on the craft interface.
Issue the following CLI command:
user@host>request chassis fpc slot slot-number online
For more information about the command, see the
CAUTION: After the
removing the FPC again, removing an FPC from a different slot, or inserting
an FPC in a different slot.
You can also verify correct FPC and PIC functioning by issuing the
show chassis fpc pic-status
and "Maintaining MX960 PICs" on page

Figure 150: Installing an FPC

Preventing Electrostatic Discharge Damage to an MX960 Router
LED lights steadily, wait at least 30 seconds before
OK
commands described in "Maintaining MX960 FPCs" on page 455
466.
LED next to the
OK
.
CLI Explorer
show chassis fpc
Copyright © 2017, Juniper Networks, Inc.
and