Juniper MX960 Hardware Manual page 447

Copyright © 2017, Juniper Networks, Inc.
user@host> show chassis routing-engine 1
Routing Engine Status:
Slot 1:
Current State Present
Verify that the Current State is Present, which indicates that the Routing Engine is
offline.
Take the first fabric plane of the backup Routing Engine offline by issuing the
3.
chassis fabric plane 3 offline
Verify that the fabric plane is offline by issuing the
4.
command.
user@host> show chassis fabric summary
Plane State Uptime
2 Online 3 minutes, 45 seconds
3 Offline
Check if the State of Plane 3 is Offline.
Take the next fabric plane offline by issuing the
5.
command and verify that the fabric plane is offline by issuing the command in Step
4.
Take the SCB in slot 1 offline by issuing the
6.
Verify that the SCB is offline by issuing the
7.
user@host> show chassis environment cb 1
CB 1 status:
State Offline
Power 1 Disabled
Power 2 Disabled
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
8.
the strap to one of the ESD points on the chassis.
Remove and replace the offline SCB on the router with the SCBE.
9.
Verify that the installation is successful and the SCB is online by issuing the
10.
chassis environment cb 1
user@host> show chassis environment cb 1
CB 1 status
State Online
Temperature 30 degrees C / 86 degrees F
Other details, such as power, are also displayed along with the state.
Chapter 27: Replacing Switch Fabric Components
command.
show chassis fabric summary
request chassis fabric plane 2 offline
request chassis cb offline slot 1
show chassis environment cb 1
command:
request
command.
command:
show
417