Chassis Lifting Guidelines - Juniper MX960 Hardware Manual

Related
Documentation

Chassis Lifting Guidelines

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
General Safety Guidelines and Warnings on page 529
Laser and LED Safety Guidelines and Warnings on page 541
Grounded Equipment Warning on page 540
Before moving the device to a site, ensure that the site meets the power, environmental,
and clearance requirements.
Before lifting or moving the device, disconnect all external cables and wires.
As when lifting any heavy object, ensure that most of the weight is borne by your legs
rather than your back. Keep your knees bent and your back relatively straight. Do not
twist your body as you lift. Balance the load evenly and be sure that your footing is firm.
Use the following lifting guidelines to lift routing devices and components:
Up to 39.7 lb (18 kg): One person.
39.7 lb (18 kg) to 70.5 lb (32 kg): Two or more people.
70.5 lb (32 kg) to 121.2 lb (55 kg): Three or more people.
Above 121.2 lbs (55 kg): Material handling systems (such as levers, slings, lifts and
so on) must be used. When this is not practical, specially trained persons or systems
must be used (riggers or movers).
General Safety Guidelines and Warnings on page 529
Installation Instructions Warning on page 534
Chapter 35: Safety and Compliance Information
535